installation [Wiki Chan_dongle]

skip to content
Wiki Chan_dongle
User Tools
Login
Site Tools
Tools
Show pagesource
Old revisions
Backlinks
Recent changes
Media Manager
Sitemap
Login
Recent changes
Media Manager
Sitemap
Trace:
Main page
preparation
installation
Table of Contents
Installation
Asterisk Installation
Prerequisites
Asterisk Installation
Install chan_dongle
Obtain source code
Set Build options
Building
Installation
Module Configuration
Installation
Chan_dongle runs only in asterisk 1.6.2 and asterisk 1.8. Asterisk 1.4 is not supported.
Asterisk Installation
There is a lot of very good howto's explaining Asterisk installation. Take a look at this brief summary (Debian), but you can take a look at
or
(in spanish).
Note that we don't need Dahdi channel to run chan_dongle, so it can be avoided.
Prerequisites
Be careful with iptables and selinux. If needed, edit
/etc/selinux/config
and write:
SELINUX=disabled
SELINUXTYPE=targeted
Then, disable iptables
iptables -F
iptables-save > /etc/iptables.up.rules
or configure it to allow SIP (port 5060) and RTP (port 10000-20000) if you plan to use these protocols.
Now upgrade your system
apt-get update
apt-get upgrade
And install packages needed for compilation of asterisk
apt-get install linux-headers-`uname -r` gcc g++ make libnewt-dev libncurses5-dev openssl libssl-dev zlib1g-dev
Asterisk Installation
Download source files and untar. Asterisk 1.6 is explained, but 1.8 looks similar.
wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.2.13.tar.gz
tar zxvf asterisk-1.6.2.13.tar.gz
If you will use FreePBX, then install asterisk-addons
wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-addons-1.6.2.2.tar.gz
tar zxvf asterisk-addons-1.6.2.2.tar.gz
Now compile
cd asterisk-1.6.2.13
make clean && ./configure --disable-xmldocs && make && make install && make config
If needed
make samples
Install chan_dongle
Obtain source code
If you installed asterisk as described
here
, go ahead. Anyway, check some dependencies like
automake
and
autoconf
. Also must have asterisk sources and development tools like
make
gcc
and so on.
SVN Method
svn checkout https://github.com/bg111/asterisk-chan-dongle/trunk/ dongle-read-only
cd dongle-read-only
aclocal && autoconf && automake -a
Compressed package
wget https://github.com/bg111/asterisk-chan-dongle/archive/master.zip
unzip master.zip
cd asterisk-chan-dongle-master
aclocal && autoconf && automake -a
Set Build options
./configure
configure options:
--enable-debug
--disable-debug
--enable-manager
--disable-manager
--enable-apps
--disable-apps
--with-asterisk=/path_to_source/asterisk.h
usefull environment variables
DESTDIR
CFLAGS
LDFLAGS
Examples
DESTDIR=“/usr/lib/asterisk/modules” ./configure
./configure –with-asterisk=/usr/src/asterisk-1.6.2.13/include
CFLAGS=“-I /usr/src/asterisk-1.6.2.13/include” ./configure
./configure --enable-debug
./configure --disable-apps --disable-manager
CFLAGS=“-O0 -g” ./configure
CFLAGS=“-Os” ./configure
default is
./configure --disable-debug --enable-apps --enable-manager
DESTDIR searching in /usr/lib/asterisk/modules /usr/local/lib/asterisk/modules /opt/local/lib/asterisk/modules
and
asterisk.h searching in ../include /usr/include /usr/local/include /opt/local/include
Building
For compile and build source to module
make
Installation
For install property configured and build module:
sudo make install
Module Configuration